Soundproof and Acoustic Drywall Installation in Crystal River, FL

Soundproof and acoustic drywall installation in Crystal River costs $4.00 to $8.00 per square foot in 2026, depending on the assembly. Acoustic work disappoints when it is sold as a product; it works when it is built as a system — mass, decoupling, cavity absorption, and sealed perimeters together — aimed at a specific noise. So the first step is two questions: what noise is bothering you, and where does it come from?

Talk to a Drywall Specialist: (352) 670-3571

Check your ZIP

Type your ZIP code. We will tell you if we serve your street.

Two workers hanging drywall panels over insulated stud walls in Crystal River, FL

A job like this one

A home office shared a wall with the family room TV. The wall was rebuilt with cavity insulation, resilient channel, and a second board layer with damping compound, then sealed at every edge. Voices dropped to a murmur; the quote had promised exactly that — not silence, and not less.

Sample price
$4.00 to $8.00 per sq ft by assembly
Sample turnaround
Three to six days for most single-wall retrofits.
Garage with drywall hung and taped in Crystal River, FL
Garage with drywall hung and taped in Crystal River, FL

Sound takes the easiest path, and a treated wall beside an untreated door, outlet, or duct run is money half-spent. We check the flanking paths — ceiling voids, back-to-back outlets, floor junctions — before pricing, and the quote shows options: what each level of treatment involves and what it realistically achieves, in plain words.

What the job covers

What it does not cover

Local noise, local buildings

The calls here follow how the area lives: home offices carved from open plans, in-law and rental splits in the county's retirement housing, bedrooms against garage and lanai noise, and medical and office suites along the corridors needing speech privacy between rooms. New construction is far cheaper to treat than retrofit, which is why acoustic scope belongs in the conversation while walls are still open — see partition installation for the wall itself.

Questions on soundproof and acoustic drywall installation

Need help in Crystal River?

Call (352) 670-3571 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.

Get a free estimate

Frequently Asked Questions

How is the price set?

Per square foot at $4.00 to $8.00 by assembly. Each added element — second layer, channel, insulation, sealing — moves the rate, and the quote prices the options side by side.

Can you make the wall soundproof?

No, and we will not use the word that way. We can cut transmission substantially and predict the improvement honestly for each assembly option.

Does insulation alone fix it?

It helps, but on its own it rarely delivers what people expect. Cavity fill is one of four parts; mass, decoupling, and sealing carry the rest.

How thick will the wall get?

It depends on the assembly — from under an inch for a board-and-damping build-up to several inches for channel or staggered-stud work. The consequence is spelled out before you commit.

Is the site look free?

Yes. The look, the flanking-path check, and the priced options cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Crystal River, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Crystal River — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,660 around Crystal River.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,310. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $750 and $1,980 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

📞 (352) 670-3571