Drywall Installation in Crystal River, FL

Drywall installation in Crystal River costs $2.00 to $3.50 per square foot, hung and finished, in 2026. A 12 by 12 foot room with 480 square feet of wall and ceiling runs $960 to $1,680 for the drywall work. The quote comes from a site look, in writing, with board, hang, finish, and texture split into lines so you can pick what gets done now and what waits.

Talk to a Drywall Specialist: (352) 670-3571

Check your ZIP

Type your ZIP code. We will tell you if we serve your street.

Two workers hanging drywall panels on insulated walls in Crystal River, FL

A job like this one

A spare room went from bare studs to smooth walls in three days. The crew hung half-inch board, taped each seam, and left the room ready for primer.

Sample price
$2.00 to $3.50 per sq ft, hung and finished
Sample turnaround
Three days with dry time.
Commercial interior with blue drywall boards in place in Crystal River, FL
Commercial interior with blue drywall boards in place in Crystal River, FL

A hang goes wrong when the studs are not flat. Wavy studs give wavy walls, and no coat of mud fixes that. So we check the frame with a long straight edge first and shim the bad studs. Then the board goes up true, and the finish reads flat in side light.

What the job covers

What it does not cover

Installation work in Crystal River

Citrus County homes sit in damp air, and baths and laundry rooms pay for it. We set mold-safe board in wet rooms as a base pick here, not an extra to sell. Garages are the other big call: fire-rated board on the house wall, per code, then a full finish. For the finish steps in full, see the taping and mudding page.

Questions on installation

Need help in Crystal River?

Call (352) 670-3571 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.

Get a free estimate

Frequently Asked Questions

How is the price set?

By the square foot of wall and ceiling, at $2.00 to $3.50 hung and finished. Board type and finish level move the rate inside that range.

What board goes on ceilings?

Five-eighths inch board in most cases. It sags less and meets fire rules in garages.

How long does a room take?

Two to four days with dry time for most rooms.

Can you hang in a shop or office?

Yes. Commercial hang and metal stud work are part of the lineup, quoted the same way.

Is the site look free?

Yes. The look and the written quote cost nothing.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Crystal River, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Crystal River — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,660 around Crystal River.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,310. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $750 and $1,980 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

📞 (352) 670-3571