Drywall Services in Beverly Hills, FL
Crystal River Drywall Specialists serves Beverly Hills, the planned retirement community about 11 miles northeast of Crystal River in interior Citrus County.
Talk to a Drywall Specialist: (352) 670-3571
Check your ZIP
Type your ZIP code. We will tell you if we serve your street.

Beverly Hills at a glance
Services in Beverly Hills
One building boom, one set of calls
Beverly Hills started as one developer's plan: Sam Kellner bought about 3,500 acres of cattle land around 1960 and sold affordable single-story homes to retirees from the urban North. The community went from about 20 homes in 1962 to the largest in the county by 1975, and that single building boom still sets our call list here: settlement cracks, nail pops, tired texture, and walls patched more than once over fifty years.
The lots are compact and the homes sit close, so staging, dust control, and shared-driveway access get planned at the look, not on the day. When the same crack keeps coming back in the same spot, we say so plainly — in homes of this age that pattern can mean settling, not a bad patch.
Work we do in Beverly Hills
- Drywall repair for cracks, pops, and worn patches in the original homes
- Texture matching to blend repairs into older wall finishes
- Drywall replacement where fifty-year-old board has gone soft or failed
- Drywall installation for additions and newer homes at the edges
Booking in Beverly Hills
Beverly Hills is a regular run northeast, and we are there most weeks. Call (352) 670-3571 for a free written quote.
Need help in Crystal River?
Call (352) 670-3571 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.
Get a free estimate
Our Services in Beverly Hills, FL
More Areas We Serve
Black Diamond, FL · Chassahowitzka, FL · Citrus Hills, FL · Citrus Springs, FL · Crystal River, FL · Crystal Springs, FL · Dunnellon, FL · Floral City, FL · Hernando, FL · Hernando Beach, FL · Holder, FL · Homosassa, FL · Homosassa Springs, FL · Inglis, FL · Inverness, FL · Lecanto, FL · Pine Ridge, FL · Red Level, FL · Sugarmill Woods, FL · Yankeetown, FL
Frequently Asked Questions
What is the unit price for new drywall?
$2.00 to $3.50 per square foot in 2026, hung and finished. Board, tape, mud, and sanding are in that range.
What adds the most cost?
Area first, then finish level, ceiling height, and texture. Paint is priced apart in most bids.
How do I read a quote?
Each line should name the work and its price: board, hang, finish, texture. If a quote is one lump sum, ask for the lines.
What finish level do I need?
Level 4 is the norm for walls that get flat or eggshell paint. Level 5 is best under gloss paint or hard side light.
Do patches come with a firm price?
Yes, after the free look. Most patches are $250 to $900 based on size and texture work.
Which towns do you serve?
Crystal River and the Citrus County towns around it — Inverness, Homosassa, Lecanto, and the rest on the service areas page. Each town page shows its own facts and ZIP codes.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Crystal River, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Crystal River — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,660 around Crystal River.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,310. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $750 and $1,980 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Crystal River Drywall Specialists
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 670-3571.