Commercial Drywall Installation in Crystal River, FL
Commercial drywall installation in Crystal River runs $2.50 to $4.50 per square foot, hung and finished, in 2026, priced from drawings and a site walk. Commercial work runs on a clock homes do not: a lease start, an equipment delivery, staff waiting to move back in. The quote breaks down each wall type and assembly, line by line.
Talk to a Drywall Specialist: (352) 670-3571
Check your ZIP
Type your ZIP code. We will tell you if we serve your street.

A job like this one
A retail fit-out carried four wall types on one floor plate: a rated demising wall, a sound-rated office, standard partitions, and a back-of-house run built for carts and knocks. Each was built to its own assembly detail and finished on the program date.
- Sample price
- $2.50 to $4.50 per sq ft, hung and finished
- Sample turnaround
- Set by the trade program; most fit-outs run one to three weeks.

Commercial board choice is driven by more than looks: fire ratings, sound transfer between tenancies, impact in corridors, and moisture in kitchens and restrooms all decide which product goes where. We read the partition schedule, check rated details against the drawings, and flag conflicts before framing starts — not at inspection.
What the job covers
- Tenant improvement and fit-out board for offices, meeting rooms, break areas, and reception
- Metal stud partition systems, from standard offices to full-height demising walls
- Rated and tenant-separation assemblies, built to the drawn detail with correct layering and joints
- Shaft walls, high walls, hard-lid ceilings, bulkheads, and impact-rated back-of-house areas
What it does not cover
- Design and permitting. We build to your drawings and the applicable code; the assembly details come from the project documents.
- Other trades' rough-in. Electrical, mechanical, and plumbing run in the open frame before boarding.
- Work outside the quoted wall types. Added assemblies are priced as their own lines before they are built.
Commercial stock around Crystal River
Commercial buildings here are mostly low-rise: the US-19 and Suncoast Boulevard retail corridors, medical offices near the hospitals in Inverness and Crystal River, and small professional buildings in Inverness. Most jobs happen inside a building doing something else at the same time, so hours, deliveries, and dust control are agreed with management up front. Rated separation work is covered in depth on the fire-rated installation page.
Questions on commercial drywall installation
Need help in Crystal River?
Call (352) 670-3571 or send the form. We will tell you plainly what the job needs and what it tends to cost before work starts.
Get a free estimate
Related Services
Drywall Installation · Drywall Partition Installation · Fire-Rated Drywall Installation · Garage Drywall Installation · Metal Stud Framing · Moisture and Mold-Resistant Drywall · Residential Drywall Installation · Soundproof and Acoustic Drywall Installation · Suspended Ceiling Installation
Frequently Asked Questions
How is the price set?
Per square foot by wall type, at $2.50 to $4.50 hung and finished. Rated and sound-rated assemblies sit at the top of the range; standard partitions at the bottom.
Can you work while we stay open?
Yes, and on occupied retail and office sites it is often the sensible option. Hours, containment, and access are set with building management before we start.
Do you frame as well as board?
Yes. Metal stud framing and boarding under one scope is the better arrangement on most fit-outs — the frame is built by the crew that has to finish it.
Who carries the fire rating — you or the board?
Neither alone. The rating belongs to the tested assembly: board type, layers, framing, and fastening together. We build to the assembly detail in the drawings.
Is the site walk free?
Yes. The walk, the takeoff from drawings, and the written quote cost nothing.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Crystal River, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Crystal River — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,660 around Crystal River.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,310. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $750 and $1,980 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Crystal River Drywall Specialists
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 670-3571.